 |
TProfessional Manager Software)
|
| |
The TProfessional Manager Software allows to control up to 5 TProfessional Thermocyclers simultaneously in a powerful network。
|
 |
- user interface like on the TProfessional Thermocyclers
- open, edit and save programs
- copy programs and user directories
- MCF – memory cloning function
- GLP conform documentation
|
User interface
|
|
The TProfessional Manager Software combines the approved graphical operating interface of the TProfessional Series with the comfort of a powerful, simultaneous PC-controlled network of up to 5 TProfessional Thermocyclers. The handling of the TProfessional Manager is based on the intuitive operating interface of the Thermocyclers with the choice between for tabular or graphical programming.
|
Memory management
|
|
The software allows the user to create, edit and save programs. Single user directories and programs can be easily copied and exchanged between the PC and the TProfessional Thermocylers. The MCF - memory cloning function allows to copy the complete memory contents between different TProfessional Thermocyclers.
|
Documentation
|
|
For GLP conform documentation of PCR runs detailed log-files with temperature data can be generated and saved. In an extended self test service files are created that can be analysed by Biometra′s service for rapid failure diagnosis if problems occur.
|
产品编号
|
产品描述
|
| 846-070-070 |
TProfessional Manager Software |
| 846-050-821 |
Serial Cable "full handshaking" |
|
|
Thermocycler Manager Software Version 4.11
|
| |
The Thermocycler Manager Software V4.11 is a modified version of the Thermocycler Manager V4.10 that allows to control the Thermocyclers T1plus, TRobot, T3000 and now also TPersonal in a network.
|
 |
- Control T3000 and TPersonal Thermocyclers
- Memory management
- Documentation
|
T3000 and TPersonal Thermocycler
|
|
T3000 and now also TPersonal* Thermocyclers can be addressed by the Thermocycler Manager Software V4.11. This allows the comfortable administration of both types of instruments in a network.
|
Memory management
|
|
The software permits the user to create, edit and save programs. Programs can be easily copied and exchanged between the PC and the different Thermocylers.
|
Documentation
|
|
For documentation PCR programs can be exported as text files. Moreover, temperature data can be saved and analysed. The software also allows to create Service Info Files that can be analysed by Biometra′s service for rapid failure diagnosis if problems occur.
|
产品编号
|
产品描述
|
| 846-050-950 |
Thermocycler Manager Software V4.11 |
| 846-050-821 |
Serial Cable "full handshaking" |
|
|
PCR CALCULATOR
|
| |
Biometra has developed a useful Excel (2003) tool that helps to simplify the setup of new PCR reactions. Download the Excel tool.
|
|
|
PCR protocol designer
|
|
The protocol designer allows to create PCR programs for different applications like conventional PCR, fast-PCR or long-range PCR. Just enter the general parameters for the protocol design as recommended by the manufacturer and target specific PCR parameters like primer annealing temperature, product length and number of cycles and a suitable PCR program is created automatically. The protocol can be modified by special settings like a gradient function or touchdown PCR.
|
PCR mastermix designer
|
|
Calculating PCR mastermixes can be a time cunsuming and error prone task. Simply enter the number of reactions, reaction volume and stock concentrations and the finally PCR mastermix is calculated automatically. Additionally, the mastermix volume can be adjusted by a pipetting error. For the documentation of results a printout of the PCR mastermix designer sheet with an inserted gel picture can be generated.
|
PCR multiplex-mix designer (NEW!)
|
|
Similar to the PCR mastermix designer but in this tab mastermixes for a multiplex PCR (up to 10 different targets) can be designed. For reactions less than a 10-plex the filter function serves for a clear representation of the used primer pairs.
|
Primer calculator
|
|
The primer calculator uses an algorithm developed by Marmur & Doty (1962) to calculate annealing temperatures. Just enter the primer sequence and the amount of lyophilzed primer to obtain the melting temperature and a suggestion how to prepare a stock solution. Primer dilutions can be calculated based on OD260 measurements.
|
|
Marmur & Doty, Determination of the base composition of deoxyribonucleic acid from its thermal denaturation temperature. J Mol Biol. 1962 Jul;5:109-18.
|
|
TEMPERATURE VERIFICATION
|
| |
For temperature verification Biometra offers the portable and easy to use PTMD system. Sensors for 0.2 ml, 0.5 ml and for 384 well blocks are available allowing temperature measurements within a range of -10°C to 110°C. The sensor setup (including tube, thermal conductive paste, sensor, wiring) is calibrated against DKD reference normal according to DIN 50049/EN 10204-3.1.B. The PTMD system allows an easy temperature check of thermocyclers. Please note that the PTMD system is not suited for the temperature adjustment of thermocyclers.
|
| |
产品编号
|
产品描述
|
| 846-050-416 |
Sensor for 0.5 ml wells (PTMD type 600/700) |
| 846-050-417 |
Sensor for 0.2 ml wells (PTMD type 600/700) |
| 846-050-418 |
Sensor for 384 wells (PTMD type 600/700) |
| 846-050-420 |
PTMD (type 700) Set 0.2/0.5 ml.
Handheld digital instrument incl. 1 sensor for 0.2 ml and 1 sensor for 0.5 ml |
| 846-050-421 |
PTMD (type 700) Set 384 well.
Handheld digital instrument incl. 1 sensor for 384 well blocks |
| 846-050-422 |
PC-Software for PTMD type 700 |
|
