 |
SA型测序凝胶电泳仪(Model S2 Sequencing Gel Electrophoresis Apparatus)
|
| |
Modular sequencing system for variable separation lengths |
 |
- 4种高度可调，可根据选配添加附件来调节测序槽高度
- 卡夹可快速、轻松调节高度
- 有调节水平脚和内置水平显示器，确保良好结果
- 带有夹子可有效定位胶
- 独特的垫圈杜绝渗漏
- 安全盖式设计保护操作者
- 另有各类梳子可选
- Internal drain system for safe buffer disposal
- Integral Aluminum plate for even heat distribution minimizes smiling effects
|
Height adjustable system
The Model SA Sequencing system is available with different apparatus heights. In addition, existing systems can be extended with a middle section to increase separation distance. |
No smiling effect or distorted bands
The S2 sequencing apparatus features an integrated Aluminum plate to which the glass plate sandwich is directly attached. Due to the high thermal conductivity of Aluminum even temperature distribution across the gel is achieved. In conventional systems, higher central temperature in the gel led to faster migration of bands in this area (reason for the so called smiling effect).
Optimized handling
The SA2 Sequencing Apparatus provides and internal drain system for save buffer disposal. After the run a valve is opened to release the upper buffer volume to the lower buffer chamber. The lower buffer tray can then be removed for safe buffer disposable. This feature is especially important when radioactive samples have been separated. |
|
SA型测序凝胶电泳仪的技术参数
|
| |
产品型号
|
SA型测序凝胶电泳仪
|
| Buffer volume |
500mL |
| Buffer disposal |
Internal drain system and removable lower buffer tray |
| Gel size (W x H x D) |
SA-32：17 cm x 32 cm
SA-88：17 cm x 88 cm |
| Apparatus dimensions (W x H x D) |
SA-32：29 x 22 x 41 cm
SA-88：29 x 22 x 96 cm |
|
|
S2型测序凝胶电泳仪的订货信息
|
| |
产品编号
|
产品描述
|
31096019
31096027 |
Model SA-32
Top and base section, adjustable leveling feet, level indicator, integral gel clamps, internal buffer drain system, power chords, two 14 cm shark tooth combs, pair of glass plates, roll of gel sealing tape, surface temperature monitor (adhesive strip), manual |
| 31096050 |
Model SA-88
Top and base section, two extensions, adjustable leveling feet, level indicator, integral gel clamps, internal buffer drain system, power chords, two 14 cm shark tooth combs, pair of glass plates, roll of gel sealing tape, surface temperature monitor (adhesive strip), manual |
|
|
S2型测序凝胶电泳仪的附件
|
| |
 |
Shark tooth combs |
| |
Shark tooth combs are ideally suited for facilitating the analysis of sequencing reactions. Shark tooth combs are designed for use with all sequencing apparatus models (S2, S2001and SA). In addition, the combs can be used with all other systems with 0.4 mm spacers. |
- The teeth form barriers between adjacent lanes for sample loading
- Reduced risk of torn or deformed wells cause by square-toothed combs
- The minimal space between lanes facilitates accurate reading of sequences
- Generate flatter, more uniform loading surface than square-toothed combs.
|
产品编号
|
梳子长度
|
梳子厚度 |
梳子齿数 |
体积/狭槽 |
包装规格 |
| 21045018 |
14 cm |
0.4 mm |
25 |
2-4µl |
6个/包装 |
| 21046016 |
28 cm |
0.4 mm |
50 |
2-4µl |
2个/包装 |
| 21045026 |
14 cm |
0.4 mm |
49 |
1-2µl |
4个/包装 |
| 21105317 |
14 cm |
0.19 mm |
25 |
2-4µl |
6个/包装 |
| 21105341 |
14 cm |
0.35 mm |
25 |
2-4µl |
6个/包装 |
| 21035134 |
28 cm |
0.35 mm |
62 |
2-4µl |
2个/包装 |
|
|
Square tooth combs for model SA |
| |
产品编号
|
梳子厚度 |
梳子齿数 |
体积/狭槽 |
| 11092020 |
0.8 |
3 |
480* |
| 11092038 |
1.6 |
3 |
960* |
| 11092087 |
1.6 |
12 |
60 |
| 11092103 |
0.8 |
18 |
16 |
*. Central, preparative slot
|
|
Accessories: |
| |
产品编号
|
产品说明 |
梳子厚度 |
包装规格 |
| 21093083 |
Wedge Spacer for Model SA-32 |
0.4-1.2 mm |
2 Spacer |
| 21105382 |
Spacer silicon blocks |
|
12 Pieces |
| 21093067 |
Glass Plate Set for SA-32 |
19.7 x 33.8 cm |
2 Plates |
| 21093117 |
Glass Plate Set for SA-60 |
|
2 Plates |
| 31096324 |
Gel casting clamp for SA-32 |
|
1 Piece |
| 11032018 |
Gel Sealing Tape (1.5in X 72yd) |
|
1 roll |
| 21093034 |
Sealing for buffer chamber SA |
|
1 Piece |
| 21047014 |
Top Clamp |
|
1 Piece |
| 11098019 |
Clamps for Gel Sandwich |
|
12 Pieces |
| 21105283 |
Surface temperature monitor strips |
|
3 Pieces |
|
|
Replacement parts for Sequencing Apparatus Model SA |
| |
产品编号
|
产品描述
|
| 21105655 |
Glass Plate Wash Stand |
| 31096423 |
Extension Section, 11 cm (For Model SA 43). |
| 11958352 |
Gel Clamp Replacement Kit (spring, shoulder washer, washer, tab, knob, support ring) |
| 21047014 |
Top Clamp |
| 11099041 |
Power Cords (48in, pair, US version) |
| 21093034 |
Silicone Gasket Replacement (new gasket as of 7/96 is gray, and is self-adhesive (no glue needed) |
| 31096159 |
Upper Buffer Chamber Lid Replacement (upper buffer lid, four ratchet rivets, two washers) |
| 21105127 |
Upper Buffer Chamber Banana Plug Replacement (black cap nut, o-ring, banana plug) |
| 21105101 |
Lower Buffer Chamber Banana Plug Replacement (red cap nut, o-ring, banana plug, red plug block) |
| 31096183 |
Drain Hose Replacement |
| 21120019 |
Drain Knob Replacement (knob, four flat washers) |
| 11964129 |
Leveling Foot Replacement |
|
| |
|
|
|
