	德国耶拿公司产品
	基因扩增仪(PCR)
	实时荧光定量PCR仪
	电泳和转印系统
		琼脂糖凝胶电泳
		脉冲场电泳系统
		温度梯度电泳系统
		手工核酸测序电泳
		电泳电源系统
		印迹及转印仪
		凝胶电泳耗材
	聚酰胺凝胶电泳
		Eco-Mini
		Eco-Maxi
		Minigel Twin
		Multigel/Maxigel
		Mini-V8·10
		Model V15·17
	凝胶成像系统
	生物分析系统
	核酸提取纯化系统
	液体样品处理系统
	振荡混合和快速匀浆
	紫外可见分光光度计
	MobiLab移动实验室
	耶拿-试剂/耗材/配件
	耶拿-分析和诊断试剂
	相关产品链接

耶拿 - 聚丙烯酰胺凝胶电泳系统

Analytikjena Polyacrylamide Gel Electrophoresis (PAGE)

Model V15.17型聚丙烯酰胺凝胶垂直电泳仪

Designed for the separation of analytical and semi-preparative quantities of proteins in a single 17 x 15 cm polyacrylamide (PAGE) gel.

Runs a single gel
Built-in integral clamps hold the gel in place
Fits gels of different thickness with straight or notched glass plates

The Model V15.17 Gel Electrophoresis Apparatus is a system for high-quality separation of proteins (and nucleic acids) in a vertical standard-gel format. The gel electrophoresis apparatus is supplemented by a complete selection of accessories and replacement parts, including an external gel casting system.

用于单块15X17cm胶垂直电泳，分离蛋白或核酸，最多可同时电泳20个样品
·氯丁烯橡胶垫可有效防漏
·带直边或U型边玻璃，不同厚度的胶均可电泳
·TEFLON梳子可轻松与胶体分离
·内置夹子可以很好定位胶
·ABS型塑料经久耐用
·安全的内锁盖
·适用于样品量少，但同时需要长距离或大上样量的电泳

The Model V15.17 is designed to electrophorese a single 17 x 15 cm (W x L) vertical gel for separation of up to 20 samples on a 0.8 mm; 1.5 mm or 3 mm thick gel.

The built-in integral clamps allow easy assembly and hold gels of different thickness leak-free in place. The V15.17 is the system of choice for laboratories with low sample throughput but the need of long running distances or large sample volumes (up to 4,000 µl).

It is recommended to use Gel Casting Clamps for simple, leak-free casting of gels. This allows casting of single gels in a fraction of the time of the "conventional" tape or grease and binder clip methods.

Model V15.17型聚丙烯酰胺凝胶垂直电泳仪的技术参数

产品型号	Model V15.17型
设备规格	(宽) x (长) x (深) cm
凝胶规格	17(宽) x 15(长) cm
玻璃板规格	19.7(宽) x 16.0/18.5(长) cm
凝胶数量	1
样品容量	最多20个样品
样品体积	34 - 4000 µl (决定于凝胶的厚度)
梳子规格	梳子厚度(mm)	孔数	孔宽(mm)	容量/孔(µl)^a
	0.8	1 prep. + 2 marker lanes 10 12 14 20	139.7 13.0 10.0 8.2 4.8	1000 ^c 94 72 59 34
	1.5	1 prep. + 2 marker lanes 10 12 14 20	139.7 13.0 10.0 8.2 4.8	2000 ^c 175 135 110 63
	3.0	1 prep. + 2 marker lanes 10 12 14 20	139.7 13.0 10.0 8.2 4.8	4000 ^c 350 270 220 126
缓冲液体积	400 - 500 ml (upper buffer chamber) + 400 - 500 ml (lower buffer chamber)

^b Volume calculated for an insertion depth of 9 mm

^c Volume of the central preparative well

Model V15.17型聚丙烯酰胺凝胶垂直电泳仪的订货信息

产品编号	产品描述
21080023	Model V15.17 Gel Electrophoresis Apparatus (EU version), complete with buffer chamber, safety lid, 1 pair of glass plates (1 short glass plate 19.7 x 16.0 cm and 1 long glass plate 19.7 x 18.5 cm), 1 pair of 1.5 mm thick side spacers, 1 x 1.5 mm thick bottom spacer, 1 x 20 well comb (1.5 mm thick) and manual
Accessories:
21070065	Gel Casting Clamp (Model V15.17, V16, V16-2) (1 / pkg)
21070073	Gel Casting Clamp (Model V15.17, V16, V16-2) (2 / pkg)
11074010	Glass Plates (mixed pairs, 16,0 x 19,7 cm / 18,5 x 19,7 cm) (3 pairs)
11098019	Spring Clips (12 / pkg)
21105333	Stainless Steel Binder Clips (12 / pkg)
Spacer Sets (complete with 1 bottom spacer, 2 side spacers and 2 foam blocks)
41077017	0.8 mm thick
41077025	1.5 mm thick
41077033	3.0 mm thick
Combs, 0.8 mm (max. volume / well)*:
11956117	preparative, wit 2 marker lanes (1.000 µl)***
11956026	10 wells (94 µl)
11956034	12 wells (72 µl)
11956042	14 wells (59 µl)
21076013	20 wells (34 µl)
Combs, 1.5 mm (max. volume / well)**:
11956125	preparative, with 2 marker lanes (2.000 µl)***
11956059	10 wells (175 µl)
11956067	12 wells (135 µl)
11956075	14 wells (110 µl)
21076021	20 wells (63 µl)
Combs, 3.0 mm (max. volume / well) **:
11956133	preparative, with 2 marker lanes (4.000 µl)***
11956083	10 wells (350 µl)
11956109	14 wells (220 µl)
21076039	20 wells (126 µl)
Replacement Parts
11099025	Power Cords (EU version) (pair)
11099041	Power Cords (USA version) (pair)
11958345	Upper Platinum Wire Replacement
11958329	Lower Platinum Wire Replacement
11958213	Wire Hardware Replacement Kit (Includes 2 red cap nut, 2 black cap nut, 4 o-rings, 4 rubber washers, 4 electrode boots and 4 hex nuts) Note! Does not include the electrode!
21960059	Gasket Replacement for V15.17 (with 6 foam blocks)
21070057	Spacer Foam Blocks (12 / pkg)
11958378	Banana Plug Replacement Kit (Includes everything in the Wire Hardware (11958212) Replacement Kit plus 2 banana plugs, 2 long ratchet rivets, 2 short ratchet rivets, 2 thin washers and 2 thick washers)
11958352	Gel Clamp Replacement Kit (Includes spring, shoulder washer, tab, knob and support ring)
11958451	Clamping Support Upgrade Kit (Includes 2 support rings and gasket)
11958360	Safety Lid Replacement Kit V15.17 (Includes safety lid, 2 long ratchet rivets, 2 short ratchet rivets, 2 thin washers and 2 thick washers)
21105465	Plug Cover for Casting Clamp

* Volumes calculated for an insertion depth of 9 mm

*** Volume of the central preparative well

上次更新时间：2016年04月20日

返回页首

如有关于本站点的问题或建议，请向站点管理员发邮件

办公地址：北京市昌平区北清路1号珠江摩尔国际大厦3号楼2单元811室，邮政编码：102206

德国耶拿公司产品

相关产品链接