北京吉诺思公司网站邮址
 

德国Biometra产品

基因扩增仪(PCR)
寡聚核苷酸的合成
凝胶电泳系统
凝胶成像仪
杂交箱
Biometra-实验室设备
  Biolink DNA交联仪
水平摇床(脱色摇床)
凝胶干燥机(干胶仪)
隔膜真空泵
KH-6型低温循环仪
摇床和加热器
TB2型干式加热器
TS1型恒温摇床
TSC型恒温摇床
BioShakeXP混匀器
BioShakeiQ混匀器
电穿孔室(电穿孔腔)

相关产品链接

Grant干浴器
干式加热/冷却系统 

Biometra TB2型干式加热器(干浴器)

Biometra Thermoblock TB2

Biometra logo

TB2型干式加热器(干浴器,Thermoblock TB2)

  Dry block heater for incubation at constant temperature. Thermoblock TB2
  • Dual block positions, removable blocks
  • 11 different block options
  • Temperature range: RT +5℃ to 130℃
The Thermoblock TB2 has been developed for incubation of reaction tubes at fixed temperatures. Temperature control is achieved by means of a Pt1000 microsensor in order to reach outstanding block uniformity (+/- 0.1℃ at 37℃).
Incubation of a magnitude of samples contained in different reaction tubes causes no problems for the block heater. The TB2 has a capacity for two single blocks or one combi block. Combinations of different single blocks allow simultaneous incubation of e.g. 1.5 ml and 0.5 ml reaction tubes.
The waterproof front panel is slightly angled to facilitate data entry and temperature readings. It features 3 buttons and a central control knob for starting the block, entering temperatures up to 130℃ and additional functions. The large LED displays the current temperature as precise as up to one decimal. The TB2 has a small footprint of 200 x 280 x 100 mm (W x D x H).

TB2型干式加热器的技术参数

 
产品类型 精确数字控制型 高性能型 模拟控制经济型
产品型号 QBD1 QBD2 QBD4 QBH2 QBA1 QBA2
载样台数量 1块 2块 4块 2块 1块 2块
温度范围(室温上) +5~130℃ +5~200℃ +5~100℃
温度设定范围 15~130℃ 15~200℃ 0~100℃
温度设定分辨率 0.1℃ 0.1℃ 2℃
稳定性(@37℃) ±0.1℃ ±0.1℃ ±1.0℃
台内均一性(@37℃) ±0.1℃ ±0.1℃ ±1.0℃
台间均一性(@37℃) ±0.2℃ ±0.2℃ ±1.0℃
温度显示LED LED LED -
显示分辨率 0.1℃ 0.1℃ -
加热时间 15分(25~100℃) 25分(25~100℃)
程序温度/时间控制 - 三程序段 -
反应计时器 1~999分(声音蜂鸣器) -
计时器功能 定时控制加热开/关可达72小时 -
自动断电调整 标配 -
外置探头校正 标配(两点校正) -
高/低过温报警 标配(可设置差异超过温度0.5℃时) -
错误指示显示 标配 标配 -
功率 150W 300W 600W 300W 150W 300W
电源供应 120/230V
过温安全保护 热熔保险丝 可调 热熔保险丝
微孔板适配性 x 选配 x 选配 x 选配
载样台更换工具 标配
外观尺寸 100mm 100mm 100mm 100mm 100mm 100mm
230mm 280mm 380mm 280mm 230mm 280mm
200mm 200mm 200mm 200mm 200mm 200mm
 

产品

Thermoblock TB2

温度范围 室温+5℃~130℃
温度设定范围 15°℃~130℃
温度稳定性 +/- 0.1℃ (@ 37℃)
加热块内温度均一性 +/- 0.1℃ (@ 37℃)
加热块间温度均一性 +/- 0.2℃ (@ 37℃)
加热时间 30 - 37℃ 加热约2分钟,约3分钟稳定
  25 - 100℃ 加热约15分钟,约5分钟稳定
  30 - 130℃ 加热约20分钟,约5分钟稳定
样品容量 2个可移动的铝质加热块用于试管或微量离心管(单块)
或,1个可移动的微量板加热块(复合块)
显示 数字式,LED
显示分辨率 0.1℃
LEDs控制功能 加热器,错误
计时器 1 - 9,999 min
计时报警 蜂鸣器
外控温度传感器 选择件
附加功能 温度报警、截止调节、迟开、迟关、校准等
超温保护功能 内部热保险丝
外观尺寸 200 mm(宽) x 280 mm(深) x 100 mm(高)
运行环境温度 10℃ to 35℃ (80 % max. relative humidity)
电源 220 - 240V/50Hz,300W
加热块尺寸(宽x深x高) 单加热块:100 x 70 x 62.5 mm/复合加热块:140 x 100 x 49 mm

TB2型干式加热器的订货信息

 

产品编号

产品描述

051-300 Thermoblock TB2, 230 V; constant temperature incubation system with positions for two single blocks or one combi block, without blocks
加热块
051-310 Single block 30 x 0.5 ml tubes conical wells incl. 1 tube cover plate and 1 block lifter
051-311 Single block 70 x 0.2 ml tubes conical wells incl. 1 tube cover plate and 2 block lifters
051-312 Single block 24 x 1.5 ml tubes conical wells incl. 1 tube cover plate and 1 block lifter
051-313 Single block 24 x 2.0 ml tubes cylindrical wells incl. 1 tube cover plate and 1 block lifter
051-315 Single block 20 x 1.3 cm deep wells cylindrical wells incl. 1 block lifter
051-316 Single block 8 x 15 ml vessels conical wells incl. 1 block lifter
051-317 Single block 5 x 50 ml vessels conical wells incl. 2 block lifters
051-319 Single block without wells incl. 1 block lifter
051-320 Combi block 96 (full size) 96-well microtiter plate or 96 x 0.2 ml tubes incl. 2 block lifters
051-321 Combi block (full size) microscopic slides or microtiter plates with flat bottom incl. 2 block lifters
选配附件
051-232 Block lifter for TB1 and TB2 (2 pieces)
051-331 Tube cover plate for TB2
051-350 External temperature sensor for TB2 (for tubes > 0.5 ml volume)
   
上次更新时间:2016年04月28日
返回页首
返 回
如有关于本站点的问题或建议,请向站点管理员发邮件
办公地址:北京市昌平区北清路1号珠江摩尔国际大厦3号楼2单元811室,邮政编码:102206
电话:(010) 51659588/(010) 59519455  传真:(010) 69731382 北京吉诺思科技发展有限公司 版权所有