 |
TB2型干式加热器(干浴器，Thermoblock TB2)
|
| |
Dry block heater for incubation at constant temperature. |
 |
- Dual block positions, removable blocks
- 11 different block options
- Temperature range: RT +5℃ to 130℃
|
| The Thermoblock TB2 has been developed for incubation of reaction tubes at fixed temperatures. Temperature control is achieved by means of a Pt1000 microsensor in order to reach outstanding block uniformity (+/- 0.1℃ at 37℃). |
| Incubation of a magnitude of samples contained in different reaction tubes causes no problems for the block heater. The TB2 has a capacity for two single blocks or one combi block. Combinations of different single blocks allow simultaneous incubation of e.g. 1.5 ml and 0.5 ml reaction tubes. |
| The waterproof front panel is slightly angled to facilitate data entry and temperature readings. It features 3 buttons and a central control knob for starting the block, entering temperatures up to 130℃ and additional functions. The large LED displays the current temperature as precise as up to one decimal. The TB2 has a small footprint of 200 x 280 x 100 mm (W x D x H). |
|
TB2型干式加热器的技术参数
|
| |
Product |
Thermoblock TB2 |
| Temperature range |
室温+5℃～130℃ |
| Temperature setting |
15°℃～130℃ |
| Temperature stability |
+/- 0.1℃ (@ 37℃) |
| Uniformity within the block |
+/- 0.1℃ (@ 37℃) |
| Uniformity across similar blocks |
+/- 0.2℃ (@ 37℃) |
| Heat up time |
30 - 37℃ |
approx. 2 min, then allow 3 min for stabilisation |
| |
25 - 100℃ |
approx. 15 min, then allow 5 min for stabilisation |
| |
30 - 130℃ |
approx. 20 min, then allow 5 min for stabilisation |
| Capacity |
2 removable aluminium blocks for test tubes or
microcentrifuge tubes (Single blocks)
or
1 removable microtiter plate block (Combi block) |
| Display |
digital, LED |
| Display resolution |
0.1℃ |
| Control LEDs for |
heater, fault |
| Timer |
1 - 9,999 min |
| Timer signal |
buzzer |
| External temperature sensor |
option |
| Additional functions |
temperature deviation alarm, offset adjustment,
delay start and stop, calibration |
| Overtemperature protection |
Internal thermal fuse |
| Dimensions (W x D x H) |
200 mm x 280 mm x 100 mm |
| Enviroment operating range |
10℃ to 35℃ (80 % max. relative humidity) |
| Power |
220 - 240V/50Hz，300W |
| Block Dimensions (W x D x H) |
Single block: 100 x 70 x 62.5 mm
Combi block: 140 x 100 x 49 mm |
|
|
TB2型干式加热器的订货信息
|
| |
产品编号
|
产品描述
|
| 051-300 |
Thermoblock TB2, 230 V; constant temperature incubation system with positions for two single blocks or one combi block, without blocks |
| Blocks |
| 051-310 |
Single block 30 x 0.5 ml tubes conical wells incl. 1 tube cover plate and 1 block lifter |
| 051-311 |
Single block 70 x 0.2 ml tubes conical wells incl. 1 tube cover plate and 2 block lifters |
| 051-312 |
Single block 24 x 1.5 ml tubes conical wells incl. 1 tube cover plate and 1 block lifter |
| 051-313 |
Single block 24 x 2.0 ml tubes cylindrical wells incl. 1 tube cover plate and 1 block lifter |
| 051-315 |
Single block 20 x 1.3 cm deep wells cylindrical wells incl. 1 block lifter |
| 051-316 |
Single block 8 x 15 ml vessels conical wells incl. 1 block lifter |
| 051-317 |
Single block 5 x 50 ml vessels conical wells incl. 2 block lifters |
| 051-319 |
Single block without wells incl. 1 block lifter |
| 051-320 |
Combi block 96 (full size) 96-well microtiter plate or 96 x 0.2 ml tubes incl. 2 block lifters |
| 051-321 |
Combi block (full size) microscopic slides or microtiter plates with flat bottom incl. 2 block lifters |
| Accessories |
| 051-232 |
Block lifter for TB1 and TB2 (2 pieces) |
| 051-331 |
Tube cover plate for TB2 |
| 051-350 |
External temperature sensor for TB2 (for tubes > 0.5 ml volume) |
|
