|
|
 |
Biometra Minidry D61型凝胶干燥机(干胶仪)
Biometra Minidry D61 Gel Dryer
|
|
 |
 |
Minidry D61型凝胶干燥机(干胶仪)(Minidry D61 Gel Dryer)
|
| |
Gel drying system |
 |
- 18 x 18 cm drying surface
- Operating temperature: RT+5°C - 90°C
- Optimal sealing of the rubber mask
|
| Biometra's geldryers, highly appreciated for their durability, very quiet operation and reliability, are for drying vertical slab gels and provide optimal drying for all types of gels. |
Minidry D61, with a drying surface of 18 x 18 cm, is for laboratories with low throughput.
The gels are heated from below and the vacuum removes the moisture from below to dry the gel homogeneously. When applying the vacuum a groove that frames the drying surface provides an optimum tight seal during the drying period. All gel dryers are equipped with a timer. |
|
凝胶干燥机的技术参数
|
| |
Geldryer
|
Minidry D61
|
|
|
| U = |
230 V ± 5% |
230 V ± 5% |
230 V ± 5% |
| F = |
50 Hz |
50 Hz |
50 Hz |
| P = |
300 VA |
500 VA |
700 VA |
| I = |
1.3 A |
2.2 A |
3.0 A |
| Dimensions H x D x W |
84 x 230 x 330 mm |
84 x 340 x 550 mm |
84 x 440 x 750 mm |
| Drying surface |
18 x 18 cm |
30 x 40 cm |
40 x 60 cm |
| Temperature range |
RT + 5℃～90℃ |
RT + 5℃～90℃ |
RT + 5℃～90℃ |
| Timer range |
Selectable from 1 minute to 99 hours with alarm (audible) |
| Vacuum required |
< 40 mbar |
< 15 mbar |
< 15 mbar |
| Flow rate |
> 15 l/min |
> 18 l/min |
> 30 l/min |
|
|
真空隔膜泵的选择
|
| |
| Membrane pump |
Final Vacuum |
Minidry D61 |
Minidry D62 |
Maxidry D64 |
| MP26 (19 l/min) |
35 mbar |
+ |
(+) |
- |
| System I (MP26) |
35 mbar |
+ |
(+) |
- |
| MP20 (20 l/min) |
8 mbar |
+ |
+ |
- |
| System II (MP20) |
8 mbar |
+ |
+ |
- |
| MP40 (34 l/min) |
8 mbar |
+ |
+ |
+ |
| System III (MP40) |
8 mbar |
+ |
+ |
+ |
|
|
凝胶干燥机的订货信息
|
| |
产品编号
|
产品描述
|
| 041-000 |
Minidry D61, 18 x 18 cm drying surface, 230 V |
| 041-100 |
Mididry D62, 30 x 40 cm drying surface, 230 V |
| 041-300 |
Maxidry D64, 40 x 60 cm drying surface, 230 V |
| |
| 041-003 |
Filter paper, 390 x 510 mm, 0.9 mm thick, 25 sheets |
| 041-004 |
Cellophane, 0.3 m x 50 m |
| 041-001 |
Frit for Minidry D61 |
| 041-013 |
Silicone mask for Minidry D61 |
| 041-101 |
Frit for Minidry D62 |
| 041-103 |
Silicone mask for Minidry D62 |
| 041-301 |
Frit for Maxidry D64 (40 x 60 cm) |
| 041-303 |
Silicone mask for Maxidry D64 (40 x 60 cm) |
|
|
|
