所有用于SpeedMill系列匀浆器的innuSPEED试剂盒,均是经最优化实验条件处理的,极快和高效的核酸提取,其分离的核酸无论在产量和质量上均是最佳的。
|
|
 |
innuSPEED Stool DNA Kit
|
|
For isolation of bacterial DNA from stool samples. The kit combines a very efficient homogenization of starting materials and efficient destruction of bacterial cell walls using specialized Lysis Tubes which will be processed in the homogenizer SpeedMill P12 or in an other homogenizer. After mechanically processing and subsequent proteolytic lysis a pre-filtration step to remove unlysed sample components follows. After pre-filtration the
sample will be transferred onto a Spin Filter unit and the DNA will be bound on the Spin Filter surface. After washing of the bound DNA the DNA will be eluted from the Spin Filter and is ready to use for further downstream applications. |
 |
Product specification:
Starting material:
● Stool samples from 200 up to 400 mg
● Stool samples from 200 up to 400 µl |
Storage conditions:
The innuSPEED Stool DNA Kit should be stored dry, at room temperature (14°C – 25°C) and is stable for at least 12 months under these conditions. Before every use make sure that all components have room temperature. If there are any precipitates within the provided solutions solve these precipitates by careful warming. |
Kit components:
Lysis Tube, Lysis Solution, Binding Solution, Washing Solutions, Elution Buffer, Pre-filter, Spin Filter, Receiver Tubes, Manual |
产品编号
|
产品描述
|
845-KS-1570010 |
innuSPEED Stool DNA Kit,10 reactions |
845-KS-1570050 |
innuSPEED Stool DNA Kit,50 reactions |
845-KS-1570250 |
innuSPEED Stool DNA Kit,250 reactions |
|