	相关产品链接
	LED/LCD/铅珊测量
	颜色色度测量
	浊度/比浊测量
	表面反射测量
	环境/水质测量
	颜色的故事

	相关链接
	GC-5000L型光度计
	VSR-400型色差计
	ND-11型密度计
	NL-1型辉度计
	NDH-5000雾度计


ISO9001:2000

发光二极管/液晶显示器/铅珊测量仪器

LED/LCD/LeadFrame Measurement Instruments

NDH-5000型浊度仪

根据最新的ISO13468测量标准设计，且可兼容ASTM1003标准在内的常用测量标准，通过选择新标准/旧标准的补偿方法，进行不同标准的浊度测量。具有内置的光束转换机械结构，无需移动样品即可进行快速和准确的测定。

This model will be most appropriate for measurements of plastic, film, vinyl, or glass in the terms of haze (turbidity), total light transmittance, diffuse transmittance, parallel transmittance and Turb (turbidity mg / l) for the purpose of quality control.

应用领域：

产品特点：

	可选择传统的方法(JIS K 7105，JIS K 0101)和补偿方法(JIS K 7361)，操作简单
	主要用于对塑料，胶片，玻璃纸，聚乙烯，玻璃和水的质量控制测定
	内置RS-232C接口，可非常方便的与计算机连接
	弹簧样品夹，非常利于上样和卸样
	“Com J”软件(选择件)可进行数据的采集和管理
	A white LED is used as a light source, so no lamp replacement is needed.
	A hatch type trapdoor is used at an opening, making it possible to measure total light transmittance of even a highly hazy diffusing plate with stability.
	A sample can be set either horizontally or vertically depending on its shape. A sample compartment is wide enough to accommodate a sample size from 25mm x 25mm to A4.
	You can select either a control unit (CU 1) connection type, or PC connection type.
	A measuring aperture can be chenged to 7mmΦ when using an optional attachment for taper abrasion testing.

Vertical Setting		Horizontal Setting
				Sample measurements in both horizontal setting and vertical setting are possible. A sample size of 25mm x 25mm to A4 can be accommodated into the sample compartment. Even for a sample size of larger than A4, you can measure with partial protrusion of a sample as a simplified method

NDH-2000型浊度仪技术参数

测量项目	混浊度(浊度)，总透光率，散射光透光率，平行光透光率，Turb
测量范围	浊度(混浊度)：0~100 总透光率：0~100 散射光透光率：0~100 平行光透光率：0~100 Turb：0~500 (通过校正曲线可设置到9999.99)
测量方法	积分球光电光电法光度测定法
照明/接收	0º- d方法
适合标准	JIS K 7361，JIS K 7105，JIS K 0101，ISO 13468，ASTM D 1003
准确度(重现性)	总透光率：0.05%，相对满刻度(100%)
外形尺寸	宽度400mm，深度400mm，高度190mm
重　　量	12公斤
电　　源	AC电源
功　　率	100W
光　　源	卤素灯，5V/2A
选择件

注：此型号的准确度来自于日本颜色研究所(JCRI)的国家标准

Dimensions	W 334mm x D 294mm x H 473mm
Light source	Si photo-diode with V filter
Measuring items	Total light transmittance, Haze, Diffuse transmittance, Parallel transmittance, Turb
Measuring luminos flux	14mmΦ incident light opening : 25mmΦ
Measuring area	Luminoflux : 12mmΦ Incident light opening : 25mmΦ
Measuring method	Double beam system using an integrating sphere with compensatory opening
Related standards	JIS K 7361 (ISO 13468), JIS K 7136 (ISO 14782), JIS K 7105, ASTM D 1003
Measurement accuracy	• Standard deviation within 0.03% where 20 minutes later after turning on the power, 20 times of measurements are made at 23ºC in airspace, and repeatability is checked.
Interface	Connection via Serial port (D-sub 9pin male)
Option	• Attachment for taper abrasion testing

在线产品样本(PDF格式)

上次更新时间：2014年03月21日

返回页首

如有关于本站点的问题或建议，请向站点管理员发邮件

办公地址：北京市海淀区长春桥路5号新起点嘉园4号楼901室，邮政编码：100089

相关产品链接

相关链接

ISO9001:2000