 |
S2型测序凝胶电泳仪(Model S2 Sequencing Gel Electrophoresis Apparatus)
|
| |
The approved standard for manual sequencing
|
 |
- 凝胶面积为30x40cm，与标准的14x17英寸的X光片相配
- 可制备厚度为0.2-0.8mm的平板胶或0.4-1.2mm的梯形胶
- 内置夹子，可以有效地压紧玻璃，又不会过紧
- 独特的垫圈杜绝渗漏，胶和缓冲液直接进行接触，无需密封油或易碎的U型玻璃
- 安全盖式设计保护操作者
- 另有各类梳子和附件可选Drain system for convenient and safe buffer disposal
- Integral aluminum plate for minimization of smiling effect and distorted bands
- Built-in integral clamps hold the gel in place
|
| Optimized handling The S2 sequencing system provides and internal drain system for save buffer disposal. After the run a valve is opened to release the upper buffer volume to the lower buffer chamber. The lower buffer tray can then be removed for safe buffer disposable. This feature is especially valuable when radioactive samples have been separated. |
No smiling effect or distorted bands
The S2 sequencing apparatus features an integrated Aluminum plate to which the glass plate sandwich is directly attached. Due to the high thermal conductivity of Aluminum even temperature distribution across the gel is achieved. In conventional systems, a higher center temperature in the gel led to faster migration of bands in this area (reason for the so called smiling effect).
Many accessories included
The S2 sequencing system comes with all hardware components needed for gel casting. Included are a pair of glass pates, side spacers, shark tooth combs, gel sealing tape and a manual.
Power supply
Biometra recommends to use the Power Pack PS9009 with the S2 sequencing gel electrophoresis system |
|
S2型测序凝胶电泳仪的技术参数
|
| |
产品型号
|
S2型测序凝胶电泳仪
|
| Buffer volume |
1L |
| Buffer disposal |
Internal drain system and removable lower buffer tray |
| Glass plate size (W x H x D) |
33 cm x 39 cm x 4.75 mm |
| Gel size (W x H x D) |
31 x 38.5 cm |
| Apparatus dimensions (W x H x D) |
42.2 x 21.6 x 44.5 cm |
|
|
S2型测序凝胶电泳仪的订货信息
|
| |
产品编号
|
产品描述
|
| 21105036 |
Model S2 Sequencing Apparatus
Including pair of glass plates, gel sealing tape, shark tooth combs (0.4 mm), spacers (0.4 mm), manual |
|
|
S2型测序凝胶电泳仪的附件
|
| |
 |
Shark tooth combs |
| |
Shark tooth combs are ideally suited for facilitating the analysis of sequencing reactions. Shark tooth combs are designed for use with all sequencing apparatus models (S2, S2001and SA). In addition, the combs can be used with all other systems with 0.4 mm spacers. |
- The teeth form barriers between adjacent lanes for sample loading
- Reduced risk of torn or deformed wells cause by square-toothed combs
- The minimal space between lanes facilitates accurate reading of sequences
- Generate flatter, more uniform loading surface than square-toothed combs.
|
产品编号
|
梳子长度
|
梳子厚度 |
梳子齿数 |
体积/狭槽 |
包装规格 |
| 21045018 |
14 cm |
0.4 mm |
25 |
2-4µl |
6个/包装 |
| 21046016 |
28 cm |
0.4 mm |
50 |
2-4µl |
2个/包装 |
| 21045026 |
14 cm |
0.4 mm |
49 |
1-2µl |
4个/包装 |
| 21105317 |
14 cm |
0.19 mm |
25 |
2-4µl |
6个/包装 |
| 21105341 |
14 cm |
0.35 mm |
25 |
2-4µl |
6个/包装 |
| 21035134 |
28 cm |
0.35 mm |
62 |
2-4µl |
2个/包装 |
|
|
Square tooth combs for model S2001 and S2 |
| |
产品编号
|
梳子厚度 |
梳子齿数 |
体积/狭槽 |
| 21035043 |
0.4 |
16 |
25 |
| 21035068 |
1.6 |
16 |
100 |
| 21035076 |
0.4 |
20 |
19 |
| 21035084 |
0.8 |
20 |
38 |
| 21035092 |
1.6 |
20 |
76 |
| 21035100 |
0.4 |
32 |
10 |
| 21035118 |
0.8 |
32 |
20 |
| 21035126 |
1.6 |
32 |
40 |
|
|
Accessories |
| |
产品编号
|
产品说明 |
梳子厚度 |
包装规格 |
| 21105366 |
Spacer Set for Model S2001/S2 |
0.35 mm |
2 Spacer, 12 End blocks |
| 21108014 |
Spacer Set for Model S2001/S2 |
0.4 mm |
2 Spacer, 12 End blocks |
| 31109010 |
Spacer Set for Model S2001/S2 |
0.8 mm |
2 Spacer, 12 End blocks |
| 31109028 |
Spacer Set for Model S2001/S2 |
1.6 mm |
2 Spacer, 12 End blocks |
| 21107016 |
Wedge Spacer for Model S2001/S2 |
0.4-1.2 mm |
2 Spacer |
| 21105077 |
Spacer Set for Model S2001/S2 |
0.4 mm |
1 Spacer |
| 21105069 |
Spacer Set for Model S2001/S2 |
0.8 mm |
1 Spacer |
| 21105325 |
Spacer Set for Model S2001/S2 |
1.2 mm |
1 Spacer |
| 21105051 |
Spacer Set for Model S2001/S2 |
1.6 mm |
1 Spacer |
| 21105382 |
Spacer silicon blocks |
33 x 39 cm |
12 Pieces |
| 11034014 |
Glass Plate Set for S2001/S2 |
|
2 Plates |
| 11032018 |
Gel Sealing Tape |
|
1 roll |
| 21105358 |
Sealing for buffer chamber S2001/S2 |
|
1 Piece |
| 21047014 |
Top Clamp |
|
1 Piece |
| 11098019 |
Clamps for Gel Sandwich |
|
12 Pieces |
| 21105283 |
Surface temperature monitor strips |
|
3 Pieces |
|
|
Replacement parts for Sequencing Apparatus Model S2 |
| |
产品编号
|
产品描述
|
| 21105127 |
Upper Buffer Chamber Banana Plug Replacemement (contains black cap nut, O-ring and banana plug) |
| 21105101 |
Lower Buffer Chamber Banana Plug Replacement
(contains red cap nut, O-ring, banana plug and red plug block |
| 31115017 |
Upper Buffer Chamber Lid Replacement (contains lid, four ratchet rivets,
2 washers) |
| 11116019 |
Lower Buffer Chamber Lid Replacement (contains lid, four ratchet rivets,
2washers) |
| 21113014 |
Upper Platinum Wire with Carrier (curved upwards to prevent covering
drain port) |
| 11958352 |
Gel Clamp Replacement Kit (includes spring, shoulder washer,
washer tab, knob and support ring) |
| 21120019 |
Drain Hose Clamp Knob Replacement Kit (contains knob and 4 flat washers) |
| 21121017 |
Silicone Drain Hose |
| 21112016 |
Lower Buffer Chamber |
|
| |
|
|
|
